McCulloch MAC 740 Manuál s instrukcemi stáhnout pdf (Strana 6)

6

Thumb on underside of

handlebar

Elbow loc ked

S Keep a good, firm grip on the saw with both

hands when the engine is running and don’t

let go. A firm grip will help you reduce kick-

back and maintain control of the saw . Keep

the fingers of your left hand encircling and

your left thumb under the front handlebar .

Keep your right hand completely around the

rear handle whether your are right handed or

left handed. Keep your left arm straight with

the elbow locked.

S Position your lefthand onthe fronthandle-

bar so it is in a straight line with your right

hand on the rear handle when making

bucking cuts. Never reverse right and left

hand positions for any type of cutting.

S Standwithyourweightevenlybalancedon

both feet.

S Stand slightly to the left side of the saw to

keep your body from being in a direct line

with the cutting chain.

S Do not overreach. You could be drawn or

thrown of f balance and lose control of the

saw.

S Donotcutaboveshoulderheight. Itisdiffi-

cult to maintain control of saw above

shoulder height.I

KICKBACK SAFETY FEATURES

WARNING:The following featuresare

includedonyoursawto helpreduce thehazard

of kickback; however, such features will not to-

tally eliminate this dangerous reaction. As a

chain saw user , do not rely only on safety de-

vices. Y ou must follow all safety precautions,

instructions, and maintenance in this manualto

help avoid kickback and other forces which

can result in serious injury.

S Reduced--Kickback Guide Bar, designed

with a small radius tip which reduces the

size of the kickback danger zone on the

bar tip.A Reduced--KickbackGuide Bar has

been demonstrated to significantly reduce

the number and seriousness of kickbacks.

Small Radius Tip

Reduced

K

ickback

Symmetrical

Guide Bar

Symmetrical Guide Bar

Large Radius Tip

S Low--Kickback Chain, designed with a

contoured depth gauge and guard link

which deflect kickback force and allow

wood to gradually ride into the cutter.

L

ow-

K

ickback Chain

Contoured Depth Gauge

Elongated Guard Link

Deflects Kickback

Force And Allows

Wood To Gradually

Ride Into Cutter

S Handguard, designed to reduce the chance

of your left hand contacting the chain if your

hand slips off the front handlebar.

S Position of front and rear handlebars, de-

signedwithdistancebetweenhandlesand

“in-line” with each other. The spread and

“in-line” position of the hands provided by

this design work together to give balance

and resistance in controlling the pivot of

the saw back toward the operator if kick-

back occurs.

WARNING: DO NOT RELY UPON

ANYOFTHEDEVICESBUILTINTOYOUR

SAW. YOU SHOULD USE THE SAW

PROPERLY AND CAREFULLY TO AVOID

KICKBACK. Reduced--kickback guide bars

and low--kickback saw chains reduce the

chance and magnitude of kickback and are

recommended.Your saw has alowkickback

chainandbar asoriginalequipment.Repairs

on a chain brake should be made by an au-

thorized servicing dealer . Take your unit to

the place of purchase if purchased from a

servicingdealer,or tothenearestauthorized

master service dealer.

S Tipcontactin somecasesmay cause alight-

ning fast reverse REACTION, kicking the

guide bar up and back toward the operator .

S Pinchingthe sawchainalongthetop ofthe

guide bar may push the guide bar rapidly

back toward the operator.

S Eitherofthesereactions maycauseyouto

lose control of the saw which could result

in serious injury. Do not rely exclusively

uponthesafetydevices builtintoyoursaw .

1 2 3 4 5 6 7 8 9 10 11 ... 16 17

Komentáře k této Příručce

Žádné komentáře